Earthquaker Devices Swiss Things Pedalboard Reconciler

Earthquaker Devices

Product image 1Earthquaker Devices Swiss Things Pedalboard Reconciler
Product image 2Earthquaker Devices Swiss Things Pedalboard Reconciler
Product image 3Earthquaker Devices Swiss Things Pedalboard Reconciler

Regular price $299.00

Swiss Things™ combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.

 

This is what you can do with it:

  • Use as many pedals as you’d like without tone-suck
  • Quickly and easily bypass or engage all of your effects with one click
  • Use Flexi-Switch™ Technology with every pedal in your setup
  • Eliminate volume pedal tone-suck by using any expression pedal to control volume
  • Use multiple amps without phase issues, ground loops, or extra noise
  • Tidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location 

 

Here’s what the footswitches do:
1. Loop 1: Press this to engage Loop 1. It features Flexi-Switch™ Technology and is unbuffered for use with all distortion, overdrive, and fuzz pedals, or anything else that doesn’t like being buffered. 

2. Loop 2: Press this to engage Loop 2. It also features Flexi-Switch™ Technology and is buffered for use with time-based effects (delay, reverb, modulation, etc.).

              Note: when nothing is plugged into Loop 2, it functions as a mute.

3. Boost: press this to activate the boost. It is Flexi-Switch™ Technology enabled and provides up to 20dB of clean boost post-effects loops and is intended for use as an output booster.

4. A/B: selects between Output A and Output B.

              Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or                              amplifiers which invert phase.

5. Both: activates Output A and Output B at the same time and features Flexi-Switch™ Technology

 

Here’s what the input, output, send, return, and expression jacks are for:
6. Input: plug your instrument in here.

               Note: If you have any “always-on” pedals (compressors, preamps, EQs, etc.) place them before Swiss                Things’ input. 

7. Loop 1 Send: Plug this into the input of the first pedal in the octave/overdrive/distortion/fuzz section of your board.

8. Loop 1 Return: Plug the output of the last pedal of the octave/overdrive/distortion/fuzz section into this jack. 

9. Loop 2 Send: Plug this into the input of the first pedal in the modulation section of your board.

10. Loop 2 Return: Plug the output of the last pedal of your modulation section into this jack. 

11. Tuner Output: Connect this to the input of your tuner. 

                Note: Tuner must be always turned on. If you bypass your tuner, you may experience ground loops or                  hum.

12. Volume EXP: Connect any expression pedal to this output to control volume.

               Note: Most volume pedals create “tone-suck” by loading the signal down and have limited travel. This                   solves that problem with a buffered output and allows you to use any expression pedal with the same                   results. The expression jack is placed after the “dirt” effects loop (Loop 1) which allows you to change                   volume levels without affecting gain.

13. Output A: connect this to the input of your amplifier.

14. Output B: connect this to the input of a separate amplifier to use multiple amps and/or to play in stereo.

              Note: To use Swiss Things with stereo effects, they should be placed after Outputs A & B and both                     outputs must be selected using the Both switch. 

              Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or                             amplifiers which invert phase.

              Note: To use stereo effects after Swiss Things, do not have the Phase switch engaged otherwise the L                & R inputs of your stereo  effects will be out of phase

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now